Marine air conditioner

MARINE AIR CONDITIONER

DME SERIES / DMBC SERIES / DMEC SERIES

DMEC SERIES NOW, YOU MAY ENJOY COOL SUMMER IN THE SEA. The condensing unit is composed of compressor, condenser, safety device and electrical equipments. All products are closed type that is safer. The double-tube condenser is sea water cooling type that is more efficient. Thanks to the heat-resistant design, ventilation is not necessary up to 60°C of the air temperature. It is usually installed in the main engine room. Moreover, it is available to install it everywhere like the bottom of cabin or the back of the wall, since it is designed mini and light.

MARINE AIR CONDITIONER

DME SERIES

FEATURES

1. PRODUCT DESIGN
   Compact design, miniaturized size Integration of evaporator and condensing unit Low-vibration design Easy installation
   
2. Outlet Box
   Since the outlet box is embedded in the body, no separte work and space is required.
   Waterproof design protects electrical parts.
   
3. High Efficiency
   High-efficient rotary compressor realized the enhancement in miniaturization, silent operation, and product reliability.
   Double-tube condensing coil realized high heat exchange and sea water-resistance.

Specifications

OUT DIMENSION / Blower rotation angle

INSTALLATION

1. Select a model appropriate to the required cooling capacity(kcal/hr, load) and power source.
   
2. The place to be installed should be accessible for repairs and available to set the inlet grill.
   
3. Install and tightly fix the product on a level surface that is endurable to the vessel's rolling and pitching motion load and product's load.
   
4. Don't install the product in engine room. Also, seal up the installed place in order to prevent the gas of engine room from coming in.
   
5. Don't put the end of the condensed water drain line within 1m from the engine or exhaust system.
   Also, prevent the gas from coming into the condensed water drain line.
   Such gas pollutes the cabin air with the inflow air for the product.
   
6. Set the inlet grill in the lower part of the cabin and air-supply grill in the upper part.
   
7. Comply with the duct size recommended by Daeil
   
8. Fix the ducts so tightly as not to loosen by the vessel's rolling and pitching motion and seal them so that the air cannot leak.
   
9. Make sure to use pipes for vessel and install piping in an upward direction so that air cannot stay in the water pipes.

MARINE AIR CONDITIONER

DMBC
FEATURES

Batteries are available for power source

1. No Alternator
   Since the compressor is driven by engine pully and the fan motor is rotated by batteries,
   alternator is not necessary.
   
2. The heating is heat pumping system using the heat of the sea water.
   The heating is heat pumping system using the heat of the sea water, not electric heating or combustion type.
   You don't have to worry about fire or gas poisoning. Also, it's safe and clean.
   
3. Air-conditioning and heating are available for more than one room.
   One compressor provides multiple air-conditioning and heating.
   
4. The installation is easy and inexpensive.
   The reasonable design makes installation easy.
   
5. Mini, light and durable
   Since high-performance double-tube condenser is used and all auxiliary materials
   are strictly chosen, it is mini, light and very durable.

Specifications

MARINE AIR CONDITIONER

DMEC SERIES
FEATURES

NOW, YOU MAY ENJOY COOL SUMMER IN THE SEA.

1. The condensing unit is composed of compressor, condenser, safety device and electrical equipments.
   
2. All products are closed type that is safer.
   
3. The double-tube condenser is sea water cooling type that is more efficient.
   
4. Thanks to the heat-resistant design, ventilation is not necessary up to 60 °C of the air temperature.
   
5. t is usually installed in the main engine room. Moreover, it is available to install it everywhere like the bottom of cabin or the back of the wall, since it is designed mini and light.

Specifications